We will have a booth at MADE and would love to see you there! And for those of you who are exhibiting, we are offering a show discount on all our frame building components.
Terms and Conditions:
1) 50+ pricing on all products
2) Products must be used on a bicycle that will be displayed in a booth at MADE
3) One order per customer
4) No returns or exchanges
5) Offer expires July 31st, 2024
6) E-mail order ONLY to orders[at]paragonmachineworks.com
We respectfully request that you post photos of your build on social media and tag us.
We will be CLOSED on Monday, May 27th in honor of Memorial Day. In addition to remembering and honoring those who have served and still serve our country, please remember to order in advance!
We now offer our front-style brake boss in 6/4 titanium, part number BK0102. It is compatible with 160 and180 mm rotors and flat UDH/T-Type dropouts. More details:
Our SRAM UDH/T-Type round, rear dropout with an integrated 160/180 flat mount is now available in steel, P/N DR2075! We only offer them in the eccentric style which means that a bushing is required and must be welded in to become part of the structural assembly. Bushings are available in 0.0, 0.5 and 1.0 mm offsets so that you can get your alignement just right. And did you know that the left side frame component can be engraved with your company name and/or logo? Buy 10+ pair and the engraving is FREE.
Our new 12 mm left side insert for our flat and flanged Conventional Sliding Dropouts is compatible with a post mount brake for 180 mm rotor and is available in bare (DR4148) and black anodized (B4148) 6061 aluminum.
We now have our full selection of caliper mounts that are compatible with our round, rear SRAM UDH/T-Type dropouts in stock and available for purchase!
1) Post caliper mounts in 6/4 titanium and 1018 steel:
Mitered: optimized to fit a 45 degree seatstay angle but can be handsawn down to accommodate smaller seatstay angles.
Will NOT work with seatstay angles greater than 45 degrees.
Unmitered: must be mitered to fit all common seatstay angles.
2) ISO caliper mounts in 6/4 titanium and 1018 steel:
Mitered: optimized to fit a 45 degree seatstay angle but can be handsawn down to accommodate smaller seatstay angles.
Will NOT work with seatstay angles greater than 45 degrees.
Unmitered must be mitered to fit all common seatstay angles.
Looking for that special part and not seeing it on our website? Check out our Heritage Parts category and you might find it there. Found in this category are parts that are near and dear to our hearts but no longer sell in large enough quantities for us to justify making them. We are still willing to manufacture them as a custom run but minimum purchase quantities apply (generally starting at 10+). For details about these and other parts that we no longer have as a stock item, please email orders)at)paragonmachineworks.com.
What happens when you take the left frame piece of a titanium SRAM UDH/T-Type dropout and integrate it with a flat caliper mount for 160 mm or 180 mm rotors? We call it synchronicity. Add a flat mount brake from Paul Components and it's perfection.
We have a limited number available now in 6/4 titanium, fixed and eccentric, and are in the process of making more. And yes!, we will be making them in steel and anticipate that they will be available in April. For more details please see our website.
1 of 2
Subscribe
Information on new and updated products, upcoming events, and more!
