CLDR2073: Steel SRAM UDH/T-Type Round, Rear Dropout, Eccentric (Clearance, 15% OFF!)

Product Details

MINOR SURFACE IMPERFECTION ON ONE SIDE OF TAB, DRIVE SIDE FRAME COMPONENT ; ALL SALES FINAL.

• Material: 1018 steel, includes right and left frame components
• Application: 
  • SRAM Universal Derailleur Hanger and T-Type
    • Meets all SRAM specs
• OD: 1-3/4"
• Flange Width: 25 mm
  • Push the seatstay outboard as far as possible to avoid SRAM's clearance mask
• Alignment:
  • Symmetric, side-to-side
  • Eccentric, uses a bushing for alignment
    • Select a 0, 0.5 or 1.0 mm offset bushing (purchase from Related Products below)
    • For 0.5 or 1.0 mm bushings use a 2 mm hex key to rotate the insert, using the radial holes on the flange
    • The insert is a structural part of the assembly and must be siilver brazed in; once installed it is not meant to be consumer serviced
  • The chainstay center MUST be 3.5 mm above axle center to meet SRAM's specs
  • Use the flats on the bottom of the dropout to index:
    
    • Put a straight edge on the flat and aim it 13 mm +/- 3 mm below bottom bracket center
• Flat Mount Brake:
  • Because of the location of the chainstays, a 160 mm flat mount is recommended
  • For a straight seatstay, do not go less than 60 degrees between the chainstays and seatstays
    
• Post Mount Brake:
  • Our BK2017 or BK2018 will work (purchase from Related Products below), but it lands half way on the dropout hood; a revised brake mount is coming soon
• Purchase Separately (see Related Products below):
  • Concentric or eccentric bushing
  • SRAM Universal Derailleur Hanger
    • Axle hole is threaded M12 x1
  • Skewer:
    
    • Available at a 23% discount with the purchase of a compatible dropout
    • Skewer and dropout compatibility are only guaranteed when used with a compatible Paragon Machine Works product
    • Sorry, no returns on skewers. Please check skewer drawings for measurements before ordering
• Information: Click here for information on the SRAM UDH System
• Note: We are not able to advise or make recommendations on compatibility with products that are not manufactured by us

Item sold as pair.