The store will not work correctly when cookies are disabled.
Bushing for SRAM UDH/T-Type Round, Rear Dropout: Choose Size/Material
As low as
$12.50
Only %1 left
Part #: Choose an option...
Product Details
- Materials:
- 6/4 titanium
- 303 stainless steel
- Styles:
- Concentric, 0 mm
- Eccentric, 0.5 mm
-
- Four 2.2 mm radial holes on the flange
- Use a 2 mm hex key to rotate the insert, using the radial holes on the flange
- Eccentric, 1.0 mm
- Four 2.2 mm radial holes on the flange
- Single identification groove on the 24 mm diameter
- Use a 2 mm hex key to rotate the insert, using the radial holes on the flange
- Application:
- Fits the right side of our titanium SRAM UDH/T-Type eccentric round, rear dropouts
- Allows for fine tuning wheel alignment in the frame following frame construction
- The insert:
- Must be welded (titanium) or silver soldered in (stainless steel)
- Once installed is not meant to be consumer serviced
- Is a structural part of the assembly
Item sold individually.
More Information
SKU |
Bushing for SRAM UDH/T-Type Round, Rear Dropout |
PDF Drawing |
Insert |
Subscribe
Information on new and updated products, upcoming events, and more!
© 2023 Paragon Machine Works. All Rights Reserved.