Snap Ring Dropout, 12 mm Steel: Choose Size

As low as 34.95
Only %1 left
Part #: Choose an option...
Select Option
DR2095: 1 x .866 in
DR2096: 1-1/8 x .866 in
DR2097: 1-1/8 x 1 in

The right side accommodates a hanger that can be purchased separately from Related Products below.

Testimonial from Em, Wizard Bikes:

The snap ring drop out without the snap ring installed is probably the best dropout and hanger I have worked with (both as a builder and mechanic):

  • Does not fall out even without snap ring installed.
  • Dead easy to swap if you bend it mid ride.
  • No bolts to lose or strip.

Thank you Em!

Product Details

  • Material: 1018 steel
  • Application:
    • 12 mm hub
    • Utilizes a snap ring to secure the hanger, allowing for a smaller and lighter profile
  • OD: See individual product
  • Flange Width: See individual product
  • Thickness: Inside face of the dropout is relieved to 20 mm wide x 3.5 mm deep
  • Hanger:
    • Right side accommodates a hanger that can be purchased separately from Related Products below.
    • Visit our FAQ page for information on hanger alignment
  • Skewer:
    • Skewers are available at a 25% discount with the purchase of a compatible hanger
    • Skewer and hanger compatibility is only guaranteed when used with a compatible Paragon Machine Works product
    • We are not able to advise or make recommendations on compatibility with products that are not manufactured by us

Item sold by pair.

© 2023 Paragon Machine Works. All Rights Reserved.