Machined from 4130 steel, this is a classic dropout, with the relief on the outside. It has two M5 x .8 rack or fender eyelets, one directly above the axle and one 14 mm behind the axle. Both eyelets are 19.1 mm from the axle center. The chainstay and seatstay tabs are 58 degree included angle for large frames. The tabs are 5 mm thick, the dropout face is 6.5 mm thick (+/- 0.5 mm) and it is chamfered 45 degrees by 1 mm around the outside profile. The center of the axle to the center of the derailleur bolt is 1.180".
Item sold by pair.