Machined from 17/4 stainless steel plate, this dropout is very similar to our DR1008 except that it has a relief and hole on the seatstay tab to accommodate the Reynolds composite carbon fiber wishbone stay assembly. The chainstay and seatstay tabs are 70 degree included angle for small to medium frames. Because of the arc on the wishbone, the effective angle is about 74 degrees. The tabs are 4.7 mm thick with a 1 mm relief on the inside face, as well as a relief on the outside. The dropout face is 6.5 mm thick (+/- 0.5 mm) and is chamfered 45 degree by 1 mm around the outside profile. The center of the axle to the center of the derailleur bolt is 1.180".
DISCONTINUED PART, ALL SALES FINAL.
Item sold by pair.