Machined from 4130 steel plate, this dropout has a relief and hole on the seatstay tab to accommodate the Reynolds composite carbon fiber wishbone stay assembly. The chainstay and seatstay tabs are 70 degree included angle for large frames. Because of the arc on the wishbone, the effective angle is about 74 degrees. The tabs are 4.7 mm thick with a 1 mm relief on the inside face, as well as a relief on the outside. The dropout face is 6.5 mm thick (+/- 0.5 mm) and is chamfered 45 degree by 1 mm around the outside profile. The center of the axle to the center of the derailleur bolt is 1.180".
Item sold by pair. DISCONTINUED PART, ALL SALES FINAL.