DR2026: Steel Rear 48 Degree Low Mount Disc, Eyelets, 6.35 mm Thick, 10 mm Hub

DR2026: Steel Rear 48 Degree Low Mount Disc, Eyelets, 6.35 mm Thick, 10 mm Hub

The right side accommodates a hanger that can be purchased separately here or from the Related Products below.

7 In stock

$47.80
  • Buy 10 for $44.12 each and save 8%
  • Buy 25 for $40.44 each and save 16%
  • Buy 50 for $36.81 each and save 23%
OR
Description

Description

These left and right frame components have an integrated ISO disc mount located between the stays, and two M5 x 0.8 eyelets. They are machined from 1/4" thick 4130 steel. The entire dropout is 6.35 mm thick; it has no relief. The chainstay and seatstay tabs have a 48 degree included angle. The arced seatstay tab can be cut by the builder to accommodate angles up to 75 degrees. The right dropout with the hanger installed is 8 mm thick. It is chamfered 45 degrees x 1 mm around the outside profile and pockets.

Important Information

  1. The right side accommodates a hanger that can be purchased separately here or from the Related Products below.
  2. Use our 160 mm ISO adapter, BK4003 or BK4003B, for a clean, integrated brake mount.

Item sold by pair.

Features

SPECIFICATIONS

Item Number DR2026
Weight/Grams 280
Material Steel
Skewer OD 10 mm
Alloy 4130
STEP File (right click, "save as") Low Mount Disc Dropout and Hangers
PDF Drawing Low Mount Disc Dropout and Hangers