DR2034: Steel 48 Degree Low Mount Disc, No Eyelets, 10 mm Hub

DR2034: Steel 48 Degree Low Mount Disc, No Eyelets, 10 mm Hub

The right side accommodates a hanger that can be purchased separately here or from the Related Products below.

50+ In stock

$40.50
  • Buy 10 for $37.38 each and save 8%
  • Buy 25 for $34.26 each and save 16%
  • Buy 50 for $31.19 each and save 23%
OR
Description

Description

These right and left frame components have an integrated ISO disc mount located between the stays, and no eyelets. They are machined from 1/4" thick 4130 steel. The chainstay and seatstay tabs have a 48 degree included angle. The arced seatstay tab can be cut by the builder to accommodate angles up to 75 degrees. The tabs are 5 mm thick, and the dropout face and caliper mounting holes are the thickness of the stock material. The right dropout with the hanger installed is 8 mm thick. It is relieved on one side and is chamfered 45 degrees x 1 mm around the outside profile and windows.

Important Information

  1. The right side accommodates a hanger that can be purchased separately here or from the Related Products below.
  2. Use our 160 mm ISO adapter, BK4003 or BK4003B, for a clean, integrated brake mount.

Item sold by pair.

Features

SPECIFICATIONS

Item Number DR2034
Weight/Grams 194
Material Steel
Skewer OD 10 mm
Alloy 4130
STEP File (right click, "save as") Low Mount Disc Dropout and Hangers
PDF Drawing Low Mount Disc Dropout and Hangers