This triple cable stop is based on three 9 mm circles, with two ears forming a miter to fit 1-1/2" tubing. The two ears are meant to be fusion welded to the tube, eliminating the need for any filler material at the weld. The first two positions are 9 mm long with two 6 mm holes x 8 mm deep, and 3/32" slots to clear all cables. The third position is a single saddle for holding full-length housing or disc brake hydraulic hose to the frame with a zip-tie. It is 16.6 mm long and has a 1/8" slot for a small zip-tie. This is the front stop if mounted on the top of the top tube, with the brake saddle on the left side. Made from CP titanium.
Item sold individually.