This triple cable stop is based on three 9 mm circles, with two ears forming a miter. The two ears are meant to be fusion welded to the tube, eliminating the need for any filler material at the weld. It is 9 mm long and has two 6 mm holes x 8 mm deep. The slots are 3/32" slot to clear all cables, with chamfers. The third position has a 6 mm though hole for brake applications with full-length housing, or disc brake hydraulic lines. This is the front stop if mounted on the top of the top tube, with the brake hole on the left side. It is mitered opposite the slots to fit 1-1/4" tubing. Made from 1018 steel.
Item sold individually.