This single saddle cable guide is used for holding disc brake hydraulic hose or full-length housing to the frame with a zip-tie. It has four ears forming a miter that are meant to be fusion welded to the tube, eliminating the need for any filler material at the weld. It is 12 mm long and has a 5/32" slot between the ears to allow for a small zip-tie and clearance for paint or powder coating. It is mitered opposite the slot to fit 1" to 1-1/2" tubing. Made from 1018 steel.
Please note: thick paint or powder coat may clog the zip-tie slot.
Item sold individually.