This stop is based on a 12 mm diameter ball, with a 7 mm diameter x 3.5 mm long stem to weld to the frame. It is cross drilled and tapped M5 x 0.8 to accommodate a threaded barrel adjuster such as our CS1013 (see Related Products on this page), has detent slots, and the cable centerline to tube is 0.340". It is not mitered and is typically used on downtubes, but may be used on headtubes. Made from 304 stainless steel.
Please note: both CS1019 (see Related Products on this page) and CS1021 can be used on seattubes to allow a barrel adjuster on the frame for front derailleurs. We've also seen them used on chainstays to allow a barrel adjuster on the stay for rear derailleurs.
Item sold individually.