This bottom bracket shell is machined from 1 5/8" x .150" wall 3/2.5 titanium tubing. The outside diameter is finish machined to size, 1-9/16". The width is 100.5 mm, 0.5 mm oversize to allow for clean up after welding. The threads are 1.370"-24, right and left hand, and the thread length is 0.50". The left hand thread is identified by a radial groove on the face of the shell. The minor diameter of the thread is 1.330"/1.340" and is relieved on the inside diameter to 1.385"/1.395".
THIS ITEM IS THE SAME AS OUR BB0018 BUT THE THREADS ARE TIGHTER THAN THE STOCK ITEM, ALL SALES FINAL.
- Use our heatsink FT5007 (see Related Products on this page).
Item sold individually.
Photo courtesy of Triton Bikes.