This bottom bracket shell is designed specifically for the SRAM PF30 bottom bracket. The outside diameter is 2" by 74 mm wide, providing 1 mm for facing after welding. The inside diameter is supplied .5 mm undersized, to 45.5 (1.791"), and must be finished to width and size after fabrication by the frame builder. Machined from 3/2.5 titanium, it is relieved in the center for weight reduction to 47.24 mm (1.860").
- All our PF30 bottom bracket shells are compatible with PF30 eccentrics.
- Use with our heatsink FT5004 (see Related Products on this page).
Item sold individually.
Photos courtesy of Crisp Titanium and Moots.