DR0031: 58 Degree Low Mount Disc, Eyelets, 10 mm Hub

These left and right frame components have an integrated ISO disc mount located between the stays, and two M5 x 0.8 eyelets. They are machined from 7 mm thick 6/4 titanium. The chainstay and seatstay tabs have a 58 degree included angle. The arced seatstay tab can be cut by the builder to accommodate angles up to 75 degrees. The right dropout with the hanger installed is 8 mm thick. It is relieved on one side and is chamfered 45 degrees x 1 mm around the outside profile and windows.

The right side accommodates a hanger that can be purchased separately from here or from the Related Products below.

Item sold by pair.